-40%
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack
TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack

TILE RESCUE Injection Adhesive for Loose Tile Repair 10.5 oz. Tubes 2- Pack

$ 10

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Condition: New
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Non-Domestic Product: No
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: Tile Rescue

    Description

    TILE RESCUE Premium Injection Repair Adhesive is a Professional Strength, very fluid, non- expanding repair adhesive specially formulated to re-bond & permanently save those loose & hollows.
    Got Crunchy sounding tiles? Cracking Grout? No worries Tile Rescue Injection Repair them without removal.
    Coverage:
    One 10.5 oz. TILE RESCUE Injection Repair Adhesive covers approx. 4 sq. ft.
    Directions for Rescuing and Repairing Loose & Hollow, Crunchy Tiles:
    1.
    Using a masonry drill bit whichever is largest drill 3-5 injector holes through the grout line around each side of the tile.
    Do not drill into the
    sub-floor
    .
    2.
    Vacuum over each hole to clear, tapping with rubber hammer to help loosen debris.
    3.
    Place TILE RESCUE tip into injector hole to measure for largest cut point so tip does not rest onto the subfloor. Cut the tip.
    4.
    Using a standard caulk gun squeeze TILE RESCUE into each hole.
    Squeeze slowly and don?t apply too much pressure.
    If one hole is blocked move on to inject the other holes.
    Sometimes you will see TILE RESCUE come up out of nearby holes and grout lines. This is good as it ensures complete coverage of the problem area.
    If no adhesive comes out of nearby holes it?s OK, simply tap the tiles to check the hollow sound is now solid.
    5.
    Wipe up excess TILE RESCUE with clean, wet sponge as necessary.
    Place weighted objects over Rescued tiles and allow to dry for a minimum of 12-24 hours, dries clear.
    6.
    When dry re-grout over injected holes, will adhere to existing grout. After grout has dried wipe clean with damp sponge.
    Your floor has been Rescued by TILE RESCUE! Solid! GUARANTEED!
    100% ECO-FRIENDLY, LOW VOC?s, NON-HAZARDOUS, NON-FLAMMABLE
    Can be used on small areas or the entire floor!
    Caution:
    This product is to be used only for its intended purpose. Be sure to use with adequate ventilation, do not put on face or in eyes, do not swallow or ingest. If so wash with water. If problems occur consult physician immediately. Safe for use on heated floors. Keep from freezing before use. Not for use in wet areas. The shelf life of un-opened TILE RESCUE is 2 years.
    Satisfaction Guarantee:
    If proven defective, TILE RESCUE offers replacement equal to purchase value.