Atlona AT-DVI40SRS DVI Extender

Description

Atlona AT-DVI40SRS DVI Extender
The
Atlona AT-DVI40SRS DVI Extender
, with capability to extend DVI signal over a single Cat5/Cat6 cable, handles resolutions up to 1600x1200 at up to 130’ (40m) and 1280x1024 at up to 200’ (61m). It uses a Cat-5/5e/6 cable to transmit digital video of PC to the remote monitor/projector. The unit meets DVI 1.1 compliant standard.
With integrated EDID (extended display identification data), the PC will continue sending digital signals even if the monitor is disconnected. You can then reconnect the monitor in a remote location without rebooting the operating system. The DVI Extender features 8-level equalization rotary control, and allows the receiver unit to learn EDID information for DVI/HDMI supported devices
The AT-DVI40SRS DVI Extender comes with a transmitter and a receiver unit. Additionally, the receiver is attached to the monitor, while the transmitter to the PC DVI output. The successful connection is indicated by blinking of 2 LED lights on the RJ45 connector.
Extends DVI signal over a single Cat5/Cat6 cable
Handles resolution up to 1600x1200 at up to 130' (40m) and 1280x1024 at up to 200' (61m)
Uses 1 Cat-5/5e/6 cables to transmit digital video of PC to the remote monitor/projector
Meets DVI 1.1 compliant standard
Integrated EDID (extended display identification data) enables the PC continue sending digital signal even if the monitor is disconnected; you can then reconnect the monitor in a remote location without rebooting the operating system
Comes with a transmitter and a receiver unit
Receiver is attached to the monitor, while the transmitter to the PC DVI output
Successful connection is indicated by blinking of 2 LED lights on the RJ45 connector
Features RJ-45 connector and DVI connector (digital only)
Supports transmission distance extension up to 200' (60m) at XGA (1024x768 @ 60Hz) and 100' (30m) at UXGA (1600x1200 @ 60Hz), and 50' (15m) at 1920x1200
Supports VESA standards and 1080i/1080p HDTV resolutions